Eaton SDR-REXT, Руководство по установке

Страница: 1 / 8

Page 1
SDR-REXT Radio Siren
Installation Guide
The SDR-REXT is an external siren and strobe unit designed for
use with i-on and Menvier control units. Radio communications
are used between the siren and the control unit, which means that
no fixed wiring between the two is needed.
This product must be installed by qualified service personnel.
Key Features

Easy to install

100 dB(A) sound output

Range of 500m in free space

High-power comfort LEDs

High-power LED strobes

Built-in spirit-level

Self-supporting lid for ease of
installation

Jamming detection

Revolving fixing holes

Engineer (quiet maintenance) mode

Battery voltage monitoring

Lid and rear tamper detection

Selectable cut-off timer

Choice of siren tones

Impact-resistant polycarbonate
construction
Table of Contents
Installing the Siren 1
Quick Reference 3
Installer (Engineer) Mode 4
PCB Jumper Details 4
Set Conf 4
Jam Det 4
Tone 4
Time 4
Comfort LED Operation 4
Fault and Tamper Monitoring 5
Summary of Strobe Operation 5
Maintenance 5
Specifications 5
Installing the Siren
Step 1
– Choose a Location for the Siren
Choose a location that is:

Out of reach of intruders and vandals.

Easily visible for maximum deterrence.

Within radio range of the control
unit/expander (max 500m in free
space).
Note: Prior to installation, a
radio signal-strength survey should be
carried out using the optional Eaton
Survey Tool.