Eaton SDR-REXT, Руководство по установке

Страница: 3 / 8

Page 3
Ten seconds after closing the lid, the
comfort LEDs extinguish, then (if
enabled) flash alternately to show that
the siren is ready. (If you open the lid
again, the siren will self activate.)
4. Fully test the system.
5. Exit the Installer menu. The system is
ready.
Figure 2: SDR-REXT Radio Siren
Quick Reference
Note: See PCB Jumper Details for further information.
Figure 3: Jumpers and Connections
Hinged cover
for lid-retaining
screw
Link/terminal cover
Cover retaining
tab (pull tab
each side to
release cover)
Tamper switch
Spirit level
Battery (1 of 2)
Top fixing hole
Revolving fixing
hole (1 of 3)
Cable entry hole
Time : Choose the sounder cut-off period
Tone : Fit the link or leave open to select the sounder tone
Jam Det : Fit the link to enable
monitoring for jamming
Set Conf : Fit to enable
set/unset confirmation
from the strobe
Bat A/B : Battery connectors