Eaton Lighting Systems iLight Product Series - SCD24 IM7524 iss 4 5
Network Termination
Network Connections
IMPORTANT NOTE: Connecting a mains potential cable to the iLight Network terminals is likley
to damage the unit and others connected, and invalidate warranty.
Termination On = Jumper across upper pins
Termination Off = Jumper across lower pins
IMPORTANT: Ensure jumper is in the off
position for all devices other than those at the
the end-of-line.
Applies 120Ω resistor to the iCAN network.
Required at each end of the network cable run
only.
Function
Network Cable Colour
0V
Black
CAN L
White
Shield
Silver
CAN H
Blue
+12Vdc
Red
Connections for the iCAN network are located on the CPU card at the bottom of the unit with
the cover removed.
There are two 5-way green connectors for the network. Either of
these may be used (as an in and an out) or a single used with the
network cable doubled-up to it.
