19
②
Enter the Bypass output setting interface.Press and hold the
function setting key
for more than half a second(less than 2
seconds), then come to setting interface of bPS, at this time, the
letters “bPS” will light for a long time. The “ON” below the bPS
will flash. Press and hold the inquiring key
for more than half
a second (less than 2 seconds) to determine whether the bPS function
is used or not. If used, the corresponding word is “ON”, if not,
the word is “OFF”. It can be determined by yourself.
③
Confirm the Bypass output setting interface. After selecting ON or
OFF, press and hold the function setting key
for more than 2
seconds. Now, the bPS setting function is completed and the “ON”
or “OFF” below the “bPS” will light without flash.
④
Exit from the setting interface. Press and hold function setting
key
for more than 2 seconds, exit from the setting interface
and return to main interface.
⑤
After setting bPS as ON, when mains power plugged in without turning
on the UPS or no mains power plugged in, there is bypass output but
no power down backup function.
5.3.3 Output voltage setting (optional function)
①
Enter the setting interface.Press and hold the function setting key
for more than 2 seconds, then come to setting interface, Press
and hold the function setting key
for more than half a
second(less than 2 seconds), select the function setting, choose
the output voltage setting interface, at the moment, the letters
“OPU” will flash as following:
