7
©2015 Eaton Corporation
All rights reserved
REC Series Enclosure Installation Guide _issue 4
Installation Guide
5. STABILIZING
CAUTION:
BEFORE THE RACK IS CONFIGURED WITH EQUIPMENT (IF THE COM-
BINED WEIGHT OF THE RACK AND EQUIPMENT IS OVER 200KG) THE FOLLOWING
PROCEDURE MUST BE IMPLEMENTED AND THE RACK MUST REMAIN STATIC. IF
THE RACK IS TO BE RELOCATED THEN EQUIPMENT MUST BE REMOVED BEFORE
MOVING THE RACK.
Each enclosure is equipped with four leveling feet (Fig 1).
Use a 13 mm spanner to adjust the leveling feet. Ensure that each foot is in firm contact
with the floor. Using a level, adjust the leveling feet as required to level the enclosure. For
enclosures that have casters, extend the leveling feet so that the casters are
approximately 3 mm off the floor.