Eaton Corporation Page 3 Ver 1.1
Important Safety Notification
General
This user manual contains important instructions and notifications for the
Eaton grid-tie PV Inverter which must be followed during installation and
maintenance for of the inverters.
The Eaton grid-tie PV Inverter is designed and tested in order to meet
international safety requirements, but yet as with all electrical and electronic
equipment, certain precautions must be observed during the installation and
operation of the Eaton grid-tie PV Inverter.
In order to avoid personal injury during installation and daily operation of the
Eaton grid-tie PV Inverter, users must to read and follow all instructions,
cautions and warnings that are described within this manual.
Electrical Code
For all electrical installation within the United States, Eaton grid-tie PV
Inverters must follow National Electrical Code regulation in addition to any
other localized regulations. For all electrical installation in Canada, inverter
installation must be completed in accordance with applicable Canadian
standards.
Safety Instructions
This manual contains various warnings in order to minimize the hazards to
personnel and equipment. Not following the procedures correctly or abnormal
practices could result in damage to the Eaton grid-tie PV Inverter and/or other
equipment(s) that is connected to the Eaton Inverter, plus personal injury.
Preventive Regulation of Product
Inverter shall be installed by authorized personnel who have read and
understand the operation instructions. Authorized/qualified personnel are
defined in the National Electric Code. Moreover, Eaton grid-tie PV Inverters
are provided with fixed trip limits and shall not be aggregated above 30kW on
a single point of common connections.
