![background image](http://html1.mh-extra.com/html/eaton/powerxl-dx-net-ethercat-2/powerxl-dx-net-ethercat-2_manual_524574021.webp)
3 Installation
3.1 Introduction
DX-NET-ETHERCAT-2
01/14 MN040009EN
www.eaton.com
17
3 Installation
3.1 Introduction
This chapter provides a description of the mounting and the electrical con-
nection for the fieldbus connection DX-NET-ETHERCAT-2.
In the case of DA1 variable frequency drives, the way in which the DX-NET-
ETHERCAT-2 fieldbus connection needs to be installed will depend on the
corresponding variable frequency drive‘s size.
Figure 6:
Flush mounting of fieldbus connection
In the case of DA1 variable frequency drives with sizes FS2 and FS3, the
fieldbus connection will need to be plugged into the variable frequency drive
from below. In the case of sizes FS4 and up, the fieldbus connection will
need to be mounted on the right side, underneath the variable frequency
drive's front enclosure cover.
→
While installing and/or mounting the fieldbus connection, cover
all ventilation slots in order to ensure that no foreign bodies can
enter the device.
→
Perform all installation work with the specified tools and without
the use of excessive force.
L2/N
L3
DC-
L1/L
DC+
BR
U
V
W
1 2 3 4 5 6 7 8 9 10 11 12 13
14 15 16 17 18
COM
11 12 13 14 15 16 17 18
RUN
ERR
Содержание PowerXL DX-NET-ETHERCAT-2
Страница 4: ...II ...
Страница 20: ...2 Engineering 2 2 LED indicators 16 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 28: ...3 Installation 3 7 Install field bus 24 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...
Страница 54: ...4 Commissioning 4 12 CoE communication objects 50 DX NET ETHERCAT 2 01 14 MN040009EN www eaton com ...