5
Instruction Leaflet
PUB53765
Effective November 2021
DM1/DM1 Pro plenum rated NEMA 1 kit
EATON
www.eaton.com
Step 6:
Mount the NEMA 1 kit left plate
h
and right plate
i
back to the
NEMA 1 kit conduit plate
⑭
and drive with two screws
g
and two
screws
21
, then connect the input grounding wire
⑯
and output
grounding wire
⑱
to the grounding holes on the NEMA 1 kit left
plate
h
and core NEMA 1 kit right plate
i
(see Figure 8) .
Figure 8. Reinstalling the left and right plates and connecting
the input and output grounding wire.
Step 7:
Mount the terminal cover
④
back to the drive (see Figure 9) .
Figure 9. Reinstalling the terminal cover.
Mount the NEMA 1 kit front cover
b
back to the conduit box with
screws
c
(see Figure 10)
Figure 10. Reinstalling the front cover.
Step 8:
Mount the drive together with the NEMA 1 kit to the mounting plate
with two M5 (or 3/16 inch) screws at the 2 corners (top left and
bottom right) (see Figure 11) .
Figure 11. Mounting the drive and mounting plate.
Mount the NEMA 1 kit fan cover
j
back to the NEMA 1 kit drive
housing
⑪
with screws
f
(see Figure 12) .
Figure 12. Mounting the fan cover.
Output grounding wire
⑱
NEMA1 kit left plate
⑧
NEMA1 kit right plate
⑨
Input grounding wire
⑯
Screws
Screws
⑦
NEMA1 kit conduit plate
⑭
Input grounding hole
Output grounding hole
21
Terminal cover
④
NEMA 1 kit front cover
②
Screws
③
Top left
corner
Bottom right
corner
Screws
⑥
NEMA 1 kit
fan cover
⑩
NEMA 1 kit
drive housing
⑪
