![background image](http://html1.mh-extra.com/html/eaton/powerxl-de1-series/powerxl-de1-series_quick-start-manual_4032311014.webp)
PowerXL DE1 VSS Quick Start Guide
13
PowerXL DE1 Series Variable Speed Starter
MN040015EN– February 2015 www.eaton.com
If the DE1 VSS has an internal communication fault (CPU fault), the green
Run
LED will turn off and the
Status
and
Fault Code
LEDs will both illuminate to a solid/continuous red status.
NOTE
: If this occurs the DE1 is faulty and will need to be replaced.
Fault Messages can be reset by:
Switching off the main voltage supply and switching it back on (cycling power)
Switching off (removing) the input enable signal (DI1 or DI2) and switching it back on
Table 4. Fault Code LED fault messages