Eaton PowerXL DE1 series, Быстрый старт

Страница: 13 / 15

PowerXL DE1 VSS Quick Start Guide
PowerXL DE1 Series Variable Speed Starter
MN040015EN– February 2015 www.eaton.com
12
Step 4 – LED Light Indicators and Faults
The Run , Status , and Fault Code LEDs will behave as follows:
Run LED – Operation Signal (GREEN):

Flashes every 2 seconds when the main voltage is applied, there is no enable input signal
present at DI1 or DI2, and there are no active fault messages

Solid/continuous when the device is running and there is an input enable (start) signal on DI1
or DI2

No illumination when the main power is removed or there is an internal device fault
Status LED – Status Message (RED):

Flashes with the Fault Code LED when there is an undervoltage condition

Solid/continuous illumination with Fault Code LED in the event of an internal communication
fault (DE1 malfunctioning)
Fault Code LED – Fault Signal (RED/YELLOW):

Cyclical Red flashing/pulse sequence with 2 second pauses observe Table 4

Flashes Red with the Status LED when there is an undervoltage condition

Solid/continuous Red illumination with Status LED in the event of an internal communication
fault (DE1 malfunctioning)

Solid/continuous Yellow when DE1 VSS DC braking is active
Figure 12. LED Status Light Layout