Eaton Power Xpert Meter 2000, Руководство пользователя

Страница: 7 / 71

Getting Started
Eaton Power Xpert Gateway PXGX UPS Card User’s Guide 164202123—Rev 1 3
Installing the Card
The hot-swappable PXGX UPS Card can be installed without turning off the UPS or disconnecting the load.
To install the PXGX UPS Card:
1. Verify that all six DIP switches on the card are in the OFF position (see Figure 1).
Figure 1. Verify DIP Switches are OFF
2. Remove the X-Slot
®
cover from the UPS. Retain the screws.
Note: If there is another card already installed with an attached communication cable, disconnect the cable
and then remove the card.
3. If not already done, record the MAC address for future reference (see Step 3 of the “Installation
Checklist”).
4. To prevent electrostatic discharge (ESD), place one hand on a metal surface such as the UPS panel.
6 5 4 3 2 1
OFF
ON