7
Installation Leaflet
IL043001EN
Effective August 2018
C445B...
Power Xpert
®
C445 Base Control
Module Installation Leaflet
EATON
www.eaton.com
C445B…
Input Voltage
Power Consumption
C445BA…
110-120 Vac / 60 Hz
220-240 Vac / 50 Hz*
+10% to -15% operating range
C445B… + C445M…: 5W
C445XC…: 2W
C445UC…: 1W
C445BD…
24 Vdc**
18-30 Vdc operating range
UL Listed Power Supply
C445B… + C445M…: 5W
C445XC…: 2W
C445UC…: 1W
*Use an external control power transformer to reduce overvoltage
category from III to II
**24Vdc common connection should be connected to earth
C445B.... Input Power
Disclaimer of Warranties and Limitation of Liability
The information, recommendations, descriptions, and safety nota-
tions in this document are based on Eaton experience and judg-
ment, and may not cover all contingencies. If further information is
required, an Eaton sales office should be consulted.
Sale of the product shown in this literature is subject to the
terms and conditions outlined in appropriate Eaton selling poli-
cies or other contractual agreement between Eaton and the pur-
chaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY,
OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY EXISTING
CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT
STATES THE ENTIRE OBLIGATION OF EATON. THE CONTENTS OF
THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY
CONTRACT BETWEEN THE PARTIES.
In no event will Eaton be responsible to the purchaser or user in
contract, in tort (including negligence), strict liability, or otherwise
for any special, indirect, incidental, or consequential damage or
loss whatsoever, including but not limited to damage or loss of
use of equipment, plant or power system, cost of capital, loss of
power, additional expenses in the use of existing power facilities,
or claims against the purchaser or user by its customers resulting
from the use of the information, recommendations, and descrip-
tions contained herein.
The information contained in this manual is subject to change
without notice.
WARNING
IF MOTOR APPLICATION NEEDS INCREASED SAFETY [Ex e] PROTECTION
USE CATALOG NUMBER C445B_-X___ CARRYING MARK. CATALOG
NUMBER C445_-S___ IS NOT APPROVED TO PROVIDE INCREASED SAFETY
[Ex e] PROTECTION TO MOTORS INSTALLED IN HAZARDOUS AREAS.
Catalog Number
Certification
C445B_-S___
C445B_-X___
Check your device’s catalog number and label for ATEX certification.
