4 Commissioning
4.3 Programming
DX-NET-SWD...
08/14 MN04012009Z-EN
www.eaton.com
31
4.3 Programming
4.3.1 Introduction
Cyclic and acyclic data as well as diagnostic data can be transferred via the
SmartWire-DT system. The number of cyclic data is variable and is defined
with the aid of profiles.
The cyclical and acyclical data used by PowerXL variable frequency drivers
has been designed in such a way as to match the following profiles and meet
the following standards:
•
the standard specified by SmartWire-DT,
•
The PROFIdrive profile
The appropriate profile can be selected by the user.
4.3.2 State diagrams
The state diagrams used below correspond to PROFIdrive profile 4.1 and are
adapted in line with the relevant profiles.
The grey boxes in the figures represent the current state (S = State) with the
help of the input bytes. The white boxes represent the transition conditions
with the help of the relevant output byte bits.
Dots are used to indicate priority levels. The more dots a transition has, the
higher its priority.
State diagrams are displayed in the following. The images indicate the
following states:
→
For the available parameter numbers (PNU)
Variable frequency drive/variable
speed starter state
Command (input) issued to variable
frequency drive/
variable speed starter
Содержание Power XL SmartWire-DT DX-NET-SWD Series
Страница 4: ...II ...
Страница 10: ...0 About this Manual 0 7 Units of measurement 6 DX NET SWD 08 14 MN04012009Z EN www eaton com ...
Страница 32: ...3 Installation 3 3 Install SmartWire DT connection 28 DX NET SWD 08 14 MN04012009Z EN www eaton com ...
Страница 92: ...4 Commissioning 4 6 SmartWire DT diagnostics 88 DX NET SWD 08 14 MN04012009Z EN www eaton com ...