Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01
21
C
Chhaapptteerr 55 D
Deevviiccee C
Chhaaiinn:: S
Seettttiinnggss
A "device" is a points list (or Modbus register map) representing a physical monitored entity, such as a
panelboard. Each points list instance has a single Modbus address.
A single PCB can have multiple devices with their own Modbus addresses. A BCMS Data Acquisition Board, for
example, can have two panelboard devices plus a small two-subfeed device, or up to three Modbus addresses.
A device may also encompass more than one PCB. A PDU device with a single Modbus address represents
both a PDU M4G board and a PDU contractor board.
Points lists are loaded onto PCBs during manufacturing.
55..11
IInniittiiaall D
Deevviiccee C
Chhaaiinn
Upon initial power-on, the Monitor searches its Modbus device chain for devices up to the device count given
in
SETUP
. The
DEVICES
screen lists all devices in the Monitor’s downstream chain (see
). Each
device in the Monitor’s device chain has
•
a unique Modbus address,
•
a device type that is identified by its Modbus server ID, and
•
its own points list (Modbus register map).
Figure 16. Initial Device List
The initial device list shows the generic device types
discovered by the Monitor in its device chain.
In this example, there is a PDU with two BCMS-monitored
panelboards and the generic BCMS device name appears
twice.
Users should change these generic device names to
unique names, in device SETTINGS, which is necessary
to isolate alarms to specific devices.
In the
DEVICES
screen device list, the Monitor displays the devices it finds in order of discovery using these
device types and default generic names:
1.
PDU
(Power Distribution Unit) with PDU transformer measurements and contractor board alarms and
relays
2.
BCMS ESF
(BCMS Enhanced Subfeeds) for large PDU subfeeds (e.g., 250A)
3.
BCMS
(BCMS Normal panelboard points list), which lets you customize alarm settings for individual
circuits)
4.
BCMS KWH
(BCMS KWH panelboard points list), which provides power usage measurements for
individual panelboard circuits
5.
BCMS CB
, a small points list, associated with BCMS Normal or KWH points lists, with current
measurements for two subfeeds from a PDU or RPP.
Содержание PDI WaveStar
