Eaton Paramount Enclosure, Руководство по установке

Страница: 29 / 61

27
Figure 9-10
Door hinge
1/4”-20 x 1/2” hex head
self-tapping screws
Figure 9-12
Door hinge
(pins released)
Door
Door hinge
(pins retracted)
Hinge flush with
edge of upright
Figure 9-11
SPLIT REAR DOORS
1. Assemble the door hinges to the enclosure corner posts with ¼-20 x ½” hex head self tapping screws. Position
the hinges flush with the inner surface of the corner post. See figure 9-1 0.
2. Retract and lock the hinge pins on each hinge. See figure 9-1 1.
3. Position the door onto the hinges then release and engage all of the hinge pins to retain the door. The door with
the lock should be on the right. See figure 9-1 2.
4. Loosen and adjust each hinge as required to align the doors. There should be a parallel 1/8” gap between the
doors, and the tops of the doors should be aligned. See figure 9-1 3.
Figure 9-13
1/8” gap
Lock
Aligned
Split rear
doors
Pub Num: MN159002EN rev1.0 Paramount Enclosure
Installation Guide