Eaton Network Card-MS Quick Start Instructions P-164000507—Rev 1
13
11. Follow the prompt to Reset (restart) the card from the main menu to take
into account the new configuration:
l
Type
1
for the Reset menu and press
Enter
.
l
Type
1
again and press
Enter
to Restart the card from the boot. (Entering
“1” here will not the display the “1” at the cursor, but it will cause the
action to start.)
12. Wait approximately two minutes while the card restarts. Several messages
display. You will see opportunities to press keys in the message line, but do
not press any keys until you see the message to enter the password to
activate the Maintenance menu.
Note:
When the green UPS Data LED flashes regularly, the card has been
restarted and is operating normally.
13. The card is now operational. To return to the Network Card-MS main menu,
enter the password at the cursor (default is
admin
). Otherwise, type
0
and
press
Enter
to exit the Network Settings menu, then type
0
and press
Enter
a
second time to exit the main menu.
14. Verify network communication:
a.
Open a browser, enter the IP address in the Address bar, and click
Go
. If
the assigned IP address is working,
you are prompted to log on.
b.
Log on as administrator. The default user name and default password
are “admin.”
c.
When the Network Card-MS Web page displays, you know that the card
is communicating with the network.
Note:
For detailed information, refer to the
Eaton
®
Network Card-MS User’s
Guide
, which is available through a link on the Documentation tab on
the card’s product Web site.
Содержание Network Card-MS
Страница 24: ...Eaton Network Card MS Quick Start Instructions P 164000507 Rev 1 24 Figure 16 Example Completion E mail...
Страница 25: ......
Страница 26: ...164950239 P 164000507 1...
