Installation Instructions – Define S122-125 Suspended LED Luminaire
Installation Instructions – Define S122-125 DP/RDP/DIP/RDIP
IL524025EN www.eaton.com
Attach strain relief to SJ Cord and pull SJ cord through access
plate to lock SJ cord in place on access plate.
3
Connect power and dimming leads to SJ cord as required using
wire nuts (by others)
4
Once power and dimming wires are connected, push the wiring
back into the fixture and re-attach the access plate. Individual
fixtures will have the diffuser and diffuser end caps already
installed. For rows, remove the diffuser and diffuser clip and set
aside. Row fixtures require internal joining so the diffuser must
be removed and re-installed after row installation is completed.
FOR CONTINUOUS ROWS ONLY: Hang far end of the next
fixture in the row using the griplock
®
and pre-installed aircraft
cable. Temporarily support the other end.
Connect power and dimming wires using provided push in
connec tors and stuff back into fixture.
Use the Cast Joiners, alignment pins, and fixture tongue to align
and guide the fixtures together.
5
6
7
8
Alignment Pins
Cast Joiner
Fixture Tongue
