NEMA 12 Conversion Kit — Installation Manual
3-4
For more information visit:
www.eatonelectrical.com
MN04003011E
January 2004
Installation Instructions for Frame 5
WARNING
After disconnecting the utility, wait until the unit cooling fan stops
and the indicators on the control panel are extinguished (if no
keypad is present, check the indicators in the cover). Wait five more
minutes before doing any work on the connections. Do not open
the cover before this time has run out.
Table 3-2: Instructions for NEMA Type 12 Kit Installation — Frame 5
Step
Procedure
1
Remove the cover of the AF Drive.
2
Open the small lid on the power unit cover,
and leave the opening uncovered.
3
Detach the fan carefully by pushing into the
connector on the side.