![background image](http://html1.mh-extra.com/html/eaton/moeller-mfd-cp4-co/moeller-mfd-cp4-co_hardware-and-engineering_4111690011.webp)
Task
7
05/08 AWB2528-1611en
Figure 2: Example of a basic page
• Start page
A user-defined 4-line start page can also be loaded in addi-
tion to the basic pages. This is stored retentively on the
display device. The start page is then always displayed if
there is no current data from the PLC. This is the case, for
example, during the startup phase or when a monitoring
error occurs. The display background is shown on the last
line of the start page.
Figure 3: Example of a start page:
Operator functions
• Baud rate and Node ID setting
The baud rate and node ID are set via a configuration menu
which you can call up irrespective of the display's fieldbus
status. The device is factory set for automatic baud rate
detection and node ID = 2. More information on the device
settings is provided on page 25.
The CP4 display is provided with a keypad with 9 buttons.
You can also control 2 LEDs.
Further information on the creation of basic and start pages
and how to use these during operation is provided in the
application note AN2700I10. This is available for download
at
Boiler 23
Set temp. 75°C
Act temp.
34°C
Heat!
MOELLER
MFD-CP4-CO
connected
Содержание Moeller MFD-CP4-CO
Страница 1: ...Display Operator System for CANopen MFD CP4 CO MFD 80 Hardware and Engineering 05 08 AWB2528 1611en ...
Страница 14: ...10 05 08 AWB2528 1611en ...
Страница 23: ...Mounting 19 05 08 AWB2528 1611en Mount communication module Figure 17 Mount communication module ...
Страница 38: ...34 05 08 AWB2528 1611en ...