Eaton Moeller CMD, Руководство пользователя

Страница: 11 / 27

Improper use
7
10/12 MN04913001Z-EN
• Motor-protective circuit-breakers, circuit-breakers and
switch-disconnectors, fitted with an undervoltage release
– NZM1, N1 + NZM1-XUVL
– NZM2, N2 + NZM2/3-XUV
– NZM3, N3 + NZM2/3-XUV
– NZM4, N4 + NZM4-XUV
Improper use The CMD contactor monitoring device has only been tested
and approved in combination with the Eaton contactors and
circuit-breakers that are listed in section “System overview”,
(
a page 6).
h
The contactor must be provided with an auxiliary NC
contact that is designed as a mirror contact in accordance
with IEC/EN 60947-4-1 Annex F.
The auxiliary NO contact and auxiliary NC contact must be
interlocked opposing in accordance with IEC/EN 60947-5-
1 Annex L.
The contactor and the CMD are fed with the same control
voltage.
h
The CMD must therefore only be combined with these
devices.