Eaton Moeller CMD, Руководство пользователя

Страница: 10 / 27

CMD contactor monitoring
relays
6
10/12 MN04913001Z-EN
The CMD contactor monitoring device is approved by the IFA
in combination with Eaton contactors and circuit-breakers
(
a section ”System overview”, Page 6). It is also provided
with a CE declaration of conformity and an EU type testing
certificate.
System overview
Figure 1: Contactor monitoring devices
The CMD contactor monitoring device requires a control
power supply.
CMD(24VDC), CMDTD: control voltage 24 V DC
The CMD relay can be combined with the following Eaton
contactors, motor-protective circuit-breakers and circuit-
breakers:
• Contactors/contact modules, fitted with an auxiliary NC
contact as mirror contact and an additional auxiliary NO
contact
Control voltage 24 V DC:
– DILM(C)7, DILM(C)9, DILM(C)12, DILM(C)15,
DILM(C)17, DILM(C)25, DILM(C)32, DILM(C)40,
DILM(C)50, DILM(C)65, DILM(C)72, DILM(C)80,
DILM(C)95, DILM(C)115, DILM(C)150, DILM(C)170
– DILEEM-G and DILEM-G
– DILM185A, DILM225A, DILM250, DILM300A,
DILM400, DILM500