6
NPServe Users Guide
Users GUide
MN024002EN February 2017
Changing the NPServe IP
IMPORTANT
When configuring the NPServe network configuration, the
Ethernet port on the NPServe must be connected to a live
device (for example, a switch). If the web page indicates
“No Ethernet Carrier”, then you do not have a working
Ethernet connection.
1. Populate the “Maintenance IP Configuration” fields as
per your network specification.
2. Click “Commit” and the present setting will update to
reflect your input.
Test mode
Test mode turns off the normal functionality of the NPServe
and gives access to low-level functions:
●
●
Reboot – Reboots the NPServe
●
●
Reset to Factory Defaults – Clearing the configuration
from this page will do a low-level format of the data
storage and will clear network settings, etc. This normally
is not necessary and a clearing configuration from the
Ethernet interface is recommended.
