![background image](http://html1.mh-extra.com/html/eaton/iq-200/iq-200_installation-operation-and-maintenance-manual_3830378042.webp)
TD 17558
Page 35
Effective 3/98
specify if a password is required, press either of the
Scroll
arrows to toggle between
y
and
n.
When the desired choice is displayed, press
Enter
to lock in the selection.
The screen changes to show
New Password
selected and the first digit of the
current password underlined. To change any digit of the password, first select it by
pressing
Enter
to move the underline to the desired digit. Then use the
Scroll
up
arrow to increase the digit or the
Scroll
down arrow to decrease the digit. When the
desired choice is displayed, press
Enter
to lock in the selection.
If the procedure completes successfully,
Download Accepted
appears briefly. The
display then returns to the previous screen.
If an error occurs in the
New Password
selection process, an error message
displays. Press
Enter
to return to the previous screen, and repeat the attempt.
4.10.3 INCOM
™
Setup
Note:
A display is required to configure the INCOM™ address.
To set these values on IQ 200 base modules installed without a permanently
connected IQ 200 display module, temporarily connect an IQ 200 display
module and follow the procedure below.
Position the selection arrow next to
INCOM™ Setup
and press
Enter.
This screen, shown in figure 4.19, displays the baud rate at which the IQ 200 will
communicate over the INCOM
™
network, and indicates the network address (in
hexadecimal) currently assigned to the IQ 200.
The screen initializes with
Baud Rate
selected and
the current value displayed. To select a baud rate at
which the IQ 200 will communicate over the
INCOM™ network, press either of the
Scroll
arrows
to step through the choices 9600 or 1200
baud
.
When the desired choice is displayed,
press
Enter
to lock in the selection.
The screen changes to show
Address
selected and the first digit of the current
network address (in hexadecimal) assigned to the IQ 200 underlined. To change
any digit of the address, first select it by pressing
Enter
to move the underline to the
desired digit. Then use the
Scroll
up arrow to increase the digit or the
Scroll
down
arrow to decrease the digit. When the desired choice is displayed, press
Enter
to
lock in the selection.
If the procedure completes successfully,
Download Accepted
appears briefly. The
display then returns to the previous screen.
Figure 4.19 INCOM™ Setup
Содержание IQ 200
Страница 52: ...TD 17558 Effective 3 98...
Страница 53: ...TD 17558 Effective 3 98...
Страница 54: ...TD 17558 Effective 3 98...
Страница 55: ...TD 17558 Five Parkway Center Pittsburgh PA 15220 Effective 3 98 Stlye 8163A33H01 Printed in U S A...