Page 2
SK-90610-Y4_EN
Special symbols
The following are examples of symbols used on the Hotswap MBP to alert you to important
information:
RISK OF ELECTRIC SHOCK
- Observe the warning associated with the risk of electric shock symbol.
Important instructions that must always be followed.
This symbol indicates that you should not discard waste electrical or electronic equipment (WEEE)
in the trash. For proper disposal, contact your local recycling/reuse or hazardous waste center.
Information, advice, help.
Refer to the user manual of UPS.
SAVE THESE INSTRUCTIONS. This manual contains important instructions
that should be followed during installation and maintenance of the MBP and UPS.
The Hotswap MBP models that are covered in this manual are intended for installation
in an environment within 0 to 40°C, free of conductive contaminant.
This equipment has been tested and found to comply with Class A UPS,pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Certification standards (in use with UPS)
p
Safety: IEC/EN 62040-1 / Ed.1: 2008.
UL 1778 4
th
edition
p
EMC: IEC 62040-2 / Ed.2: 2005
EN 62040-2 / Ed.2: 2006
FCC part 15 Class A.
p
Performance: IEC/EN 62040-3 / Ed.2.0: 2011.
p
IEC 61000-4-2 (ESD): level 3.
p
IEC 61000-4-3 (Radiated field): level 3.
p
IEC 61000-4-4 (EFT): level 4.
p
IEC 61000-4-5 (Fast transients): level 4.
p
IEC 61000-4-6 (Electromagnetic field): level 3.
p
IEC 61000-4-8 (Conducted magnetic field): level 4.
SAFETY INSTRUCTIONS
