Page 17
SK-90610-Y4_EN
ENGLISH
5. Operations
UPS
BYPASS
UPS
BYPASS
UPS
BYPASS
Return to normal operation:
1. Check that the new UPS is correctly connected to the MBP, as described below:
MBP6K208:
p
After opening the UPS I/O terminal blocks cover, connect to UPS the 2 power cables, and the MBP
detection cable (following UPS versions), of the MBP I/O cord Set
(1)
– see 4.1 for more details
p
Connect the I/O cord Set
(1)
connector to the MBP, and secure it by fixing the 2 locking screws
MBP11K208:
p
First check that the Normal AC source switch
(3)
of the MBP is still
locked
to the "0" position
p
Remove the previously installed safety wires links on both MBP conduits
p
After opening the UPS I/O terminal blocks cover, connect to UPS the MBP conduits, and the MBP
detection cable (following UPS versions) – see 4.2 for more details
p
Unlock the Normal AC source switch
(3)
of the MBP
2. Set the Normal AC source switch of the MBP to the "I" position.
3. Verify that the UPS is correctly powered (UPS display panel illuminates)
4. Press the UPS
"ON"
button to start the UPS
5. Put the UPS in
“internal Bypass mode”
(refer to the UPS User Manual)
6. Verify that the UPS is on Bypass mode by checking UPS display panel (refer to the UPS user manual)
7. Verify that the
"UPS mode" green light
of the MBP goes On, indicating that the UPS output power is
available on the MBP.
Important:
do not continue to next step if the
"UPS mode" green light
of the MBP is still Off
(the load will be lost)
8. Set the
MBP
manual Bypass switch to the
"UPS" position
: the
"Bypass mode" red light
of the MBP goes
Off, indicating that the load is now powered by the UPS
9. Put the UPS in
“normal mode”
(refer to the UPS User Manual)
10. Check that the UPS is in Online mode by checking UPS display panel (refer to the UPS user manual)
the load is now protected by the UPS
5.3 UPS maintenance with HotSwap MBP
Go to maintenance Bypass operation (please follow the MANDATORY steps below):
1. Put the UPS in
"internal Bypass mode"
(refer to the UPS user manual)
2. Verify that the UPS is on Bypass mode by checking UPS display panel (refer to the UPS user manual)
3. Set the MBP manual Bypass switch to "Bypass" position. The "Bypass mode" red light of the MBP goes
On, indicating that the load is supplied directly by AC source
4. Proceed to maintenance operations on UPS (refer to the UPS User Manual)
Return to normal operation:
1. Verify that the UPS is on Bypass mode by checking UPS display panel (refer to the UPS user manual)
2. Verify that the
"UPS mode" green light
of the MBP is On, indicating that the UPS output power is
available on the MBP
Important:
do not continue to next step if the
"UPS mode" green light
of the MBP is Off
(the load will be lost)
3. Set the MBP manual Bypass switch to the
"UPS" position
: the
"Bypass mode" red light
of the MBP goes
Off, indicating that the load is now powered by the UPS
4. Put the UPS in
"normal mode"
(refer to the UPS User Manual)
5. Check that the UPS is in Online mode by checking UPS display panel (refer to the UPS user manual)
the load is now protected by the UPS.
