Eaton H-Max Series, Руководство по установке

Страница: 81 / 134

Factory Wired Options
The Intellpass and IntelliDisconnect can be supplied with serveral factory wired power options. The sections below describe
the options.
Options
HMAX Option Matrix IPass IDisc
P3 - Drive Isolation Fuses X X
P6 - Drive Isolation Contactor includes manual switch X N/A
PE - Drive Output contactor N/A X
IS - Isolation Switch X N/A
SA - Space Heater (3R only) X X
K9 - Aux Contacts X X
M1 - Manual Bypass includes L4 and drive isolation contactor and door switch X N/A
L3 - H-Max Pilot Lights N/A X
L4 - H-Max Pilot Lights X N/A
P3- Drive Isolation Fuses
This option is available for both the IntelliPass and IntelliDisconnect designs 208/230V up to 30Hp and 480V models up to 75 hp.
3 Power Fuses are supplied wired to the Drive input. They are provided between the disconnect device and drive. The fuses
are not used in the bypass mode. The fuses are for drive protection only. They are listed, Class CC or Special Purpose Fuse
cube fuses sized according to the following table. This option cannot be used with IS Isolation switch or P6 isolation contac-
tor options. See IntelliDisconnnect or Typical IntelliPass schematic.
Hp Rating and Fuse Rating (A)
HP 208 V Fuse 230 V Fuse 460 V Fuse
1 6 6 5
2 12 12 6
3 20 20 8
5 25 25 12
7.5 30 30 20
10 45 45 25
15 60 60 30
20 80 80 45
25 90 90 45
30 100 100 50
40 N/A N/A 60
50 N/A N/A 80
60 N/A N/A 90
75 N/A N/A 100
9
Factory Wired Options
H-Max Series Drives IntelliPass®/IntelliDisconnect®
IL04008003E April 2013