Eaton H-Max Series, Руководство по установке, Страница: 24 / 134

H-Max Series Overview
14 H-Max Series Adjustable Frequency Drive
MN04008005E—September 2011
H-Max Series Overview
This chapter describes the purpose and contents of this
manual, the receiving inspection recommendations and the
H-Max Series Open Drive catalog numbering system.
How to Use this Manual
The purpose of this manual is to provide you with information
necessary to install, set and customize parameters, start up,
troubleshoot and maintain the Eaton H-Max Series adjustable
frequency drive (AFD). To provide for safe installation and
operation of the equipment, read the safety guidelines at the
beginning of this manual and follow the procedures outlined
in the following chapters before connecting power to the
H-Max Series AFD. Keep this operating manual handy and
distribute to all users, technicians and maintenance
personnel for reference.
Receiving and Inspection
The H-Max Series AFD has met a stringent series of factory
quality requirements before shipment. It is possible that
packaging or equipment damage may have occurred during
shipment. After receiving your H-Max Series AFD, please
check for the following:
Check to make sure that the package includes the Installation
Manual (MN04008005E), Quick Start Guide (MN04008004E)
and accessory packet. The accessory packet includes:
●
Rubber grommets
●
EMC grounding clamps for power cables
●
Control cable grounding clamps
●
EMC jumper locking clips
●
M4 screw for EMC level change (FS7 only)
●
Additional grounding screw
●
Real time clock battery
●
UL conduit plate
Inspect the unit to ensure it was not damaged during
shipment.
Make sure that the part number indicated on the nameplate
corresponds with the catalog number on your order.
If shipping damage has occurred, please contact and file a
claim with the carrier involved immediately.
If the delivery does not correspond to your order, please
contact your Eaton Electrical representative.
Note: Do not destroy the packing. The template printed on
the protective cardboard can be used for marking the
mounting points of the H-Max AFD on the wall or in a
cabinet.