3
Adjusting the PPS-5
Outdoor Contact Input Photosensor
Black (Ground)
Red (+24 VDC)
White (ON)
Low
Voltage
Switch
Inputs
PPS-5
Figure 7. ControlKeeper 2 Connection
Adjusting the PPS-5
A slide adjustment has been provided to change the
switchpoint of the PPS-5 sensor. If the sensor is triggering
too late, move the slide bar over the window until the
desired timing is achieved. Optimally, it is best to make
the adjustment to the slide bar when the light level is at
the switching point. Move the slide bar across the window
until the lighting turns ON. There is a 2-3 second time delay
before lights are switched when the threshold is reached.
Sensor Window
Slide Adjustments
Move Slide Adjustments
Over the Sensor Window
to Make Sensor Trip Earlier
