4
INSTALLATION INSTRUCTIONS
MN280091EN April 2018
Form 4D Recloser Control Communications Module
Figure 9 . Pushing the base circuit board into the guide
grooves
12. Push the communications base circuit board all the way
in using the support bar and secure with the provided
screw. See
Figure 10
.
Figure 10 . Support bar fully inserted and secured with a
screw
13. Install the communications module into the top
communications module slot (Com Port 1) and secure
with two of the #6-32 screws supplied with the kit. See
Figure 11
and
Figure 12
.
Figure 11 . Inserting communication module into Com
Port 1 communications slot
Figure 12 . Communications module secured with
screws
