44
USER MANUAL FERNTEL IP4 / IP160
March 2022 www.eaton.com
5.1.6.6.6 “MWI” function for selected key f
Function key f controls the connection with the message center specified in the dialog in order to listen to messages
saved there.
Type: MWI
Selection parameter set to function type
MWI
.
State:................
Selection element for setting the function state.
1
No new messages available.
2
New messages available.
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
Icon:
[1][2]
..............
Selection parameter for the optional specification of icons.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2.
Number:...............
Input parameter to specify the phone number of the message center.
Add own no.:..........
Selection parameter to specify the option “Attach own phone number.”
Off
Only use the number of the message center.
On
Attach own phone number to the message center’s number.
Global:...............
Selection parameter to specify the “Global” option.
Off
Limit MWI to this registration.
On
Extend MWI to all registrations.
5.1.6.6.7 “Call diversion” function for selected key f
Function key f reroutes the call diversions specified here, with which inbound calls can be diverted to different subscribers.
Four different call diversions 1–4 can be set. In State 0 of the function the call diversion is inactive; calls are not signaled
on the device. States 1-4 are available to specify different call diversions to mobile phone, colleagues, etc. In the device’s
idle mode, the activation of any call diversion is indicated by the icon, which appears on the left of the display footer.
If the “Always” call diversion is activated, the inverse text overlay “
Diverted to diversion destination
”
also
appears in the display’s viewing area.
Type: Call diversion
Selection parameter set to function type
Call diversion
.
State:
1)
...............
Selection element for setting the function state.
0
Call diversion is inactive.
1-4
Call diversion 1 – 4 is active.
Text:
[0]-[4]
..............
Input parameter for optional specification of caption texts.
Icon:
[0]-[4]
.............
Selection parameter for the optional specification of icons.
LED:
[1]-[4]
...............
Selection parameter to specify the LED operating mode in states 1-4.
Call diversion
[1]-[4]
.....
Open dialog to specify the call diversions 1-4.
5.1.4.1 Call diversion, optional Page 34
States whose call diversions are all switched off are omitted for the key sequence f. If only the call diversion is active
[1]
, the state
sequence is 1, 0, 1, 0, etc.; in contrast, if two call diversions are activated, the state sequence is 1, 2, 0, 1, 2, 0 and so on.
1)
5.1.6.6.8 “Call group” function for selected key f
Function key f controls the registration/deregistration of the registered user in a PBX call group. In the following dialog,
the name of the call group is indicated,
Type: Call group
Selection parameter set to function type
Call group
.
State:................
Selection element for setting the function state.
1
User n is deregistered in the call group.
2
User n is registered in the call group.
Text:
[1][2]
..............
Input parameter for optional specification of caption texts.
Icon:
[1]-[2]
.............
Selection parameter for the optional specification of icons.
LED:
[2]
.................
Selection parameter to specify the LED operating mode in state 2.
Name:.................
Input parameter to specify the name of the call group.
