Eaton EVT-300, Руководство по обслуживанию

Страница: 18 / 32

15
Service Procedure
Driver Display Unit Installation
Procedure-
1. While holding the Driver Display Unit against the mount-
ing bracket, position the Driver Display Unit to the
desired location. Check viewing angle of the Driver Dis-
play Unit. If viewing angle needs to be changed, bend
mounting bracket as necessary.
2. Clean the surface area where the Driver Display Unit
bracket will be installed. Use an alcohol-based cleaner.
3. Remove the backing from the adhesive tape on the
mounting bracket (provided screws can also be used).
Attach the Driver Display Unit mounting bracket to the
desired spot on the dashboard.
4. Remove the backing from the adhesive tape on the Driver
Driver Display Unit and attach to the mounting bracket
(provided screws can also be used).
5. Reconnect the VORAD Harness to the Driver Display Unit.
Final Check
Make sure the Driver Display Unit is securely mounted.
Make sure the VORAD Harness is connected and locked.