3
Operation
OperatiOnal manual
MN156001EN October 2015 www.eaton.com
Operation
This chapter provides information operation of the active
filter. It covers additional settings that you can configure after
commissioning. It includes descriptions of parameters and
information available on the display as well as event logs.
Home Screen
When first energized, the HMI displays the Home screen.
To return to the Home screen, press the Home icon at the
bottom on any of the screens. To change parameters, you
must be logged in as an Admin level user. From the Home
screen, you can access the following:
•
System Statuse:
Displays screens providing an overview
of the system status
•
Meteringe:
Displays screens that provide measured values
of the unit, system, and electrical distribution system
•
Waveformse:
Displays screens that graphically represent
various values measured
•
Event Loge:
Displays a list of all events that occurred with
the unit
•
System Settings:
Allows changes to be made to the
system parameters. When operating in parallel, all
systems settings must match for each unit in the parallel
system
•
Unit Settingse:
Allows changes to the unit parameters
•
Commission Unite:
Provides a step-by-step procedure to
commission the unit
Notee:
Once the unit is commissioned, you do not need
to perform this procedure again.
•
User Logine:
This is where you log into the unit to change
parameters
•
Start System/Stop Systeme:
This icon toggles between
Start System when inactive and Stop System when
active. Start System activates the unit, or in parallel
operation, it starts the entire system. Stop System
stops the unit, or in parallel operation, it stops the
entire system.
User Login
For information on setting up users, refer to Set up users
with the User Manager on
page 21
. To log in:
1.
Press User Login.
2.
Press the Username field. Type your user name on the
keypad and press Enter.
3.
Press the Password field and enter your password.
4.
Press Log In.
System Status
System Status screens display information on the unit’s
status. Also when installed as a parallel system, information
for the entire active filter system is provided. To navigate
through the screens, press the up or down arrow. To return
to the Home screen, press the Home icon. An active filter
operating as a standalone unit has four System Status
screens. Active filters operating in a parallel system have
five System Status screens.
