INSTALLATION SPECIFICATION
Eaton Industries Pty Ltd
August 2010
10 Kent Road, Mascot, NSW 2020, Australia
Page
12
of
13
DOCUMENT# 510091
8. HANDOVER
F
Take 2 copies of this entire document.
F
One copy is to be mailed or faxed back to the factory or your distributor. This copy, when received,
will activate your warranty. Please ensure that it is done immediately.
F
One copy is to be retained by the installer for future reference.
F
This document (original) is to be handed to the site manager or works supervisor for inclusion into
site quality records.
Eaton would like to thank you for correctly installing and commissioning this unit. Customer satisfaction is
very important to us and your high standard of work and attention to detail is as much a part of this unit’s
effectiveness as our design. We would like to hear from you if you have any suggestions or complaints
regarding our products. Please contact your supplier to discuss the matter.
Finalised by:
Date:
Warranty
Eaton Industries warrants the ESF series against faulty materials and workmanship for a period of 5
years from the date of installation on the condition that installation has been correctly carried out with
respect to these installation instructions. Eaton Industries reserves the right to inspect the installation to
it’s own satisfaction in regards to any claim made against this warranty, or to appoint an independent
person or persons to do the same. Due to the unpredictable nature of lightning and power surges, no
guarantee of performance is made in this respect and no responsibility shall be taken for damages or
loss resulting from, or attributed to, the installation and/or use of this equipment.
Eaton Industries Pty Ltd reserves the right to change specifications without notice.
© 2010 Eaton Industries Pty Ltd
