background image

INS #

Brand Logo  

reversed out of 

black

INS #

IB528001EN

Installation Instructions - Arena Series

SAFETY INSTRUCTIONS

Read and understand this entire manual before attempting to assemble, operate, or install the LED Luminaire.  If you 

have any questions regarding the product, please call Ephesus Customer Service at (800) 573-3600.
1.  All electrical work must conform to the National Electric Code (NEC) and all applicable local codes and ordinances.
2.  Only qualified personnel shall install and maintain the luminaires. Ephesus recommends that a licensed electrician 

install and maintain the luminaire. Verify the safety of existing power distribution system before beginning 

installation. FAILURE TO FOLLOW OPERATING INSTRUCTIONS MAY LEAD TO DEATH, SEVERE INJURY, OR 

PROPERTY DAMAGE.

WARNING

Turn off power before performing any electrical or control work. FAILURE TO FOLLOW THIS WARNING MAY LEAD 

TO DEATH, SEVERE INJURY, OR PROPERTY DAMAGE.

DO NOT make or alter any open holes in the luminaire. Do not modify the luminaire.

WARNING

Follow all applicable safety procedures and use Personal Protective Equipment such as hardhats, safety glasses, 

reflective vests, electrical safety gloves, fall protection equipment and safety toe boots during the installation, 

operation, and maintenance of the luminaire. FAILURE TO FOLLOW THIS WARNING MAY LEAD TO DEATH, 

SEVERE INJURY, OR PROPERTY DAMAGE.

WARNING

Risk of eye injury! Eye protection is required at all times during the installation, operation, and maintenance of 

the luminaire. The high intensity light produced by the luminaire can cause severe damage to the eye if viewed 

directly at close range.  Avoid being in front of a luminaire that is on or wear suitable light blocking protective 

eyewear such as welding goggles.

This manual applies to the following models:
1.  Arena Pro 600/300/190
2.  Arena 600/300/190
3.  Prism 256/128/64
4.  Visium 600/300/190

Содержание ephesus Arena Series

















Отзывы: