IL05003015E.pdf
exceeded the time-out setting (set by D1000). Please turn the ELC RUN/STOP switch to STOP, and find out the
address of the time-out program by special data register D1008. ”WDT” command can be used to solve the
problem.
☼
“BAT.LOW” LED
When the battery voltage is low, the “BAT.LOW” LED will be on, please change the battery within 3 minutes to
retain the ELC’s internal user programs and data).
☼
“Input/Output” LED
The On/Off signals of the input point could be displayed through the “Input” LED.Output LED indicates if the
output signals are On or Off.
☼
“RS-232, RS-485” LED
“RS-232” LED will light when RS-232 is receiving data, ”RS-485” LED will light when RS-485 is transferring
data.