IB505009EN
Instructions for Surelites LED Emergency Battery Packs
Includes the following model numbers: EBPLED7W, EBPLED14W
WARNING
Risk of Electric Shock
Disconnect power at fuse or circuit breaker before
installing or servicing.
WARNING
Risk of Fire/Electric Shock
If not qualified, consult an electrician.
Important Safeguards
WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE OBSERVED INCLUDING
THE FOLLOWING.
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS
2. Do not use outdoors.
3. Do not mount near gas or electric heaters
4. Equipment should be mounted in locations and at adequate
heights to prevent tampering by unauthorized personnel.
5. The use of accessory equipment not recommended by
Eaton may cause an unsafe condition and will void the
warranty.
6. Do not use this equipment for other than its intended
purpose.
7. Not for use with sealed and gasketed fixtures
8. SAVE THESE INSTRUCTIONS
NOTES
1. To prevent voltage from being present on the output wires
(Red/White & Blue/White), do not connect the test button
assembly to the EBP or insure the EZ key is securely in
place.
2. This product is for use with LED fixtures that have LED
loads capable of the output wattage and that have LED
forward voltage within the ranges below.
Output Power (W) Min Vf (V) Max Vf (V)
All 7 Watt
Versions
7
8
55
All 14 Watt
Versions
14
16
55
3. Make sure all of the connections are in accordance with
the National Electrical Code and any local regulations.
4. To reduce the risk of electrical shock, disconnect both
normal and emergency power supplies and the test button
indicator light (which disconnects the battery) before
servicing. Insuring the battery disconnect is securely in
place also prevents battery powered operation.
5. These emergency ballasts can be field or factory installed
depending on version. See mounting section for details.
6. This product is for use in indoor fixtures only. Do NOT
use near heated air handling outlets, wet locations or
hazardous locations.
7. An un-switched AC power source is required. (120 - 277
volts 50/60 HZ) for proper operation.
8. Do not attempt to service the battery. The sealed,
no-maintenance battery is not field replaceable. Contact
the manufacturer for information on service.
9. All maintenance should be performed by qualified service
personnel.
FEATURES
This emergency battery pack (EBP) includes extra features
which enhance its operation and maintainability.
1. Patented EZ key battery disconnect: When the EZ key is
inserted into the test button, the battery is disconnected.
This feature prevents unnecessary cycling of the battery
during the construction process. It can also be used if the
room is decommissioned for an extended period of time to
prevent the batteries from being over discharged.
2. Patent pending Test Button / Indicator Light / Laser Input:
The test button houses the EZ key, powers the indicator
light, contains the laser input for testing and functions as
the mechanical test button. Integration of these functions
improves performance and fixture aesthetics.
Sure-Lites
CONTAINS NICKEL-CADMIUM
RECHARGEABLE BATTERY.
MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
Ni - Cd
For use in
temperature rating
0°C to 55°C
EBPLED Class 2 Output
