Eaton Eaton series страница 21 Скачать руководство пользователя

Страница: 21 / 68

645M 4G/LTE CELLULAR ROUTER

MN032003EN March 2017 www.eaton.com

•

Special address filtering

Some traffic is not tolerated over the public internet.

This feature will add filters to prevent such traffic to go

out the interface. (the following destination IP addresses

will be discarded: 0.0.0.0/8, 192.0.0.0/24, 192.0.2.0/24,

198.51.100.0/24, 203.0.113.0/24, 192.168.0.0/16,

172.16.0.0/12, 10.0.0.0/8, 169.254.0.0/16, 224.0.0.0/4,

240.0.0.0/4).

LAN settings

•

Ethernet IP address

This sets the IP address of this device and is the address

used to access the configuration pages. If the IP address

changes you will have to re-enter the new IP address in your

browser to access the configuration pages. The default IP is

192.168.1.50

•

Ethernet subnet mask

Sets the subnet mask for the LAN side of the modem to

the device

Important

: The LAN subnet must not overlap with the WLAN

subnet defined in the Access Point tab of the WLAN page.

•

LAN masquerade

When enabled, the 645M masquerades all Ethernet traffic

to the LAN, making all WAN traffic appear as if it originated

from the 645M. This can be useful in applications where

less-capable equipment on the local LAN cannot cope with

connections from multiple Host IP addresses

•

Bind services to Eth IP

UDP datagrams or TCP sockets from services inside the

645M (Serial, IO, GPS) normally appear to come from the

interface (LAN or WAN) closest to the destination. Enable

this option to force the source address to be the LAN

Ethernet IP address. This can be useful if packets are being

sent through a VPN tunnel. Note that outside of a tunnel,

NAT may still force the source address to be rewritten to the

WAN address

DNS resolving

•

DNS auto

Selecting Enable enables the 645M to act as DNS Proxy for

the DHCP clients. Selecting Disable will provide the DNS

Server 1 or 2 addresses to DHCP clients

•

Domain name suffix

Suffix to append to short, unqualified computer names for

local DNS lookup

•

DNS server 1 IP address

The Ethernet IP address of the preferred DNS server.

The default address is 192.168.1.50, the same as the LAN

Ethernet IP Address for the modem. If the LAN Ethernet

ID Address changes, the DNS Server 1 address will

automatically change to the same

•

DNS server 2 IP address

Ethernet address of the alternate DNS server. The default is

set to 0.0.0.0

3.2.5 Other settings

Figure 21 . Other settings

3.2.6 Lan settings

Figure 22 . LAN

–

LAN settings

3 645M web interface

Содержание Eaton series





































































Результаты поиска

Содержание Eaton series

Отзывы:

Похожие инструкции для Eaton series

Бренды по названию

Популярные бренды

Eaton Eaton series, Руководство пользователя

Результаты поиска

Содержание Eaton series

Отзывы:

Похожие инструкции для Eaton series

Бренды по названию

Популярные бренды