manualshive.com logo in svg

Eaton DX-NET-PROFINET-2, Руководство пользователя

Поделиться
Скачать
Eaton DX-NET-PROFINET-2 Скачать руководство пользователя страница 2

All brand and product names are trademarks or registered trademarks of the owner 
concerned.

Emergency On Call Service

Please call your local representative:

http://www.eaton.eu/aftersales

or
Hotline of the After Sales Service:
+49 (0) 180 5 223822 (de, en)

[email protected]

For customers in US/Canada contact:

EatonCare Customer Support Center

Call the EatonCare Support Center if you need assistance with placing an order, 
stock availability or proof of shipment, expediting an existing order, emergency ship-
ments, product price information, returns other than warranty returns, and informa-
tion on local distributors or sales offices.

Voice: 877-ETN-CARE (386-2273) (8:00 a.m. – 6:00 p.m. EST)
After-Hours Emergency: 800-543-7038 (6:00 p.m. – 8:00 a.m. EST)

Drives Technical Resource Center

Voice: 877-ETN-CARE (386-2273) option 2, option 6
(8:00 a.m. – 5:00 p.m. Central Time U.S. [UTC-6])
email: 

[email protected]

www.eaton.com/drives

Original Operating Instructions

The German-language edition of this document is the original operating manual.

Translation of the original operating manual

All editions of this document other than those in German language are translations of 
the original German manual.

1

st

 published 2013, edition date 09/13

© 2013 by Eaton Industries GmbH, 53105 Bonn

Production: René Wiegand
Translation: globaldocs GmbH

All rights reserved, including those of the translation.

No part of this manual may be reproduced in any form (printed, photocopy, microfilm 
or any other process) or processed, duplicated or distributed by means of electronic 
systems without written permission of Eaton Industries GmbH, Bonn.

Subject to alteration without notice.

Содержание DX-NET-PROFINET-2


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды