Eaton DB3P, Техническое руководство

Страница: 8 / 68

4
Sounder - dB3B
TM264 July 2020 www.eaton.com
Sounder - DB3B
English
Ex d & Ex de – DC input, dual stage common
+ve with monitoring (standard configuration)
wiring details (Types 7 & 8)
Connect up to 4 supply wires to the terminals as detailed
in the wiring diagram. Stage 1 is produced when power is
applied across the ve and stage 1 -ve terminals.
Stage 2 is produced when power is applied across the
ve and stage 2 -ve terminals.
Monitoring functionality is obtained when the supply is
connected across M1 & M2 terminals.
ote: N monitored terminals are not polarity dependent.
DB3B DC DUAL STAGE
COMMON POSITIVE CONFIGURATION
WITH MONITORING
MONITORING FUNCTIONALITY ONLY
AVAILABLE WHEN RESISTOR IS FITTED
Ex de
1
2
3
4
1
2
3
4
Ex d
1
2
3
4
5
6
7
8 COMMON +VE / M1 IN
STAGE 1 -VE IN
M2 IN
STAGE 2 -VE IN
VE / M1 OUT
STAGE 1 -VE OUT
M2 OUT
STAGE 2 -VE OUT
R1
Ex d & Ex de – DC input, up to 3 stage with or
without monitoring (alternative configuration)
wiring details (Types 9 & 10)
ote: N This alternative configuration must be specified
when ordering the unit.
This type can be connected either as a three stage
common –ve configuration, or if an optional EOL is specified
if can be configured as a dual stage common –ve system
with monitoring.
•
4-wire system (Triple stage, ve): Connect
4 supply wires to the terminals as detailed in the wiring
diagram (1 ve wire and 3 -ve wires). Stage 1
is produced when power is applied across the common
+ve and stage 1 -ve terminals. Stage 2 is produced
when power is applied across the ve and
stage 2 -ve terminals. Stage 3 is produced when
power is applied across the ve and stage
3 -ve terminals.
•
4-wire system (Dual stage, common –ve with
monitoring): Connect up to 4 supply wires to the
terminals as detailed in the wiring diagram. Stage 1 is
produced when power is applied across the common
-ve and stage 1 +ve terminals. Stage 2 is produced
when power is applied across the common -ve and
stage 2 +ve terminals.
Monitoring functionality is obtained when the supply is
connected across M1 & M2 terminals.
Note: monitored terminals are not polarity dependent.
R1
DB3B DC TRIPLE STAGE
COMMON POSITIVE
CONFIGURATION
DB3B DC DUAL STAGE
COMMON NEGATIVE CONFIGURATION
WITH MONITORING
MONITORING FUNCTIONALITY ONLY
AVAILABLE WHEN RESISTOR IS FITTED
R1
COMMON +VE IN
STAGE 1 -VE IN
STAGE 3 -VE IN
STAGE 2 -VE IN
VE OUT
STAGE 1 -VE OUT
STAGE 3 -VE OUT
STAGE 2 -VE OUT
STAGE 2 +VE IN
M1 IN
STAGE 1 +VE IN
COMMON -VE / M2 IN
STAGE 2 +VE OUT
M1 OUT
STAGE 1 +VE OUT
COMMON -VE / M2 OUT
Ex d
1
2
3
4
5
6
7
8
Ex de
1
2
3
4
1
2
3
4
Ex d
1
2
3
4
5
6
7
8
Ex de
1
2
3
4
1
2
3
4
Ex d & Ex de – DC input, dual stage ve
diagram (Types 7 & 8)
Ex d & Ex de – DC input, up to 3 stage diagrams
(Types 9 & 10)