![background image](http://html.mh-extra.com/html/eaton/cwpd-series/cwpd-series_wiring-and-installation-manual_524463002.webp)
Sensor Installation
There are various methods that may be used to affix the Wireless Sensor to a ceiling surface.
Magnetic:
Magnets have been incorporated
into the Wireless Sensor allowing
the device to be affixed to a
metallic ceiling surface (metal
plate, drop-ceiling T-bar, etc).
Surface-mount:
The Wireless Sensor may be
installed directly to a ceiling surface (ceiling tile, drywall ceiling, etc). There are several techniques available to affix the Wireless
Sensor directly to ceiling surfaces.
Installation Notes
Consult www.eaton.com/lighting for the most up-to-date revision of the wireless system design guide and install this product
according to the guidelines described.
The Wireless Sensor is to be installed in dry, indoor locations ONLY. Do not install the Wireless Sensor in damp locations. Damp
locations are defined as: interior locations subject to moderate degrees of moisture, such as some basements, some barns, some
cold-storage warehouses, and the like, and partially protected locations under canopies, marquees, roofed open porches, and the like.
The Wireless Sensor provides 360° coverage pattern. It is recommended to install the sensor more than 4ft (1.2m) away from air supply vents.
Troubleshooting
There are no user-serviceable parts inside of the Sensor Interface Module. Please return the device to Eaton if service is required.
Sensor Mask Installation
Remove the ring (lens surround) from the sensor assembly. This can be achieved by rotating the ring counter clockwise.
Place the supplied mask and rotate clockwise until it latches.
Regulatory Approvals
Note
: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment under FCC rules.
This equipment has been tested and found to comply with Industry Canada ICES-003 Issue 5 (CAN ICES-3 (A)/NMB-3(A)).
Contains FCC ID: H79DFZM-E7220
Contains IC ID: 4259B-DFZM7220
Helical Screw
Thumb Screw
Drywall or Wood Screw (#6)
3
2
EATON
WaveLinx Wireless Room Sensor
Installation instructions
EATON
WaveLinx Wireless Room Sensor
Installation instructions
Magnet
Magnet
Lens
surround
Lens
surround
Top view
Extended range
Side view
20
10
0
20
10
Feet
8
20 15 11 9 5.6 3 0 3 5.6 9 11 15 20
Feet
12
5
5
12
8
12
9
9
12
7
7
5
5
3
3
0
0
Top view
Standard range
Side view
12
5
0
12
5
Feet
8
12 9 7 5 3 0 3 5 7 9 12
Feet