3 6
P a n e l M a t e e P r o P S U s e r s G u i d e
mouse, keyboard or touchscreen input) the designated amount of time, the screen
brightness will change to the configured setting. Once there is input from a mouse,
keyboard or the touchscreen, the display brightness will be immediately reset to the
default setting.
Note
: When adjusting the screen lightness for the backlight auto-dimming feature, you
may come across a setting which makes a high pitch noise or makes the screen flicker.
These are normal characteristics of fluorescent lighting and will not harm the unit itself.
Adjusting the setting up or down slightly will get rid of the flicker or noise.
Note:
All changes made to the C:\ partition must be saved or committed so that the next
time the ePro PS is restarted the new data will be available. Refer to the
section for additional information about saving files to the C:\ partition.
Protect Mode Save Program
The PanelMate ePro PS unit is always in Protect Mode which means that the unit is
protected against unwanted changes to data stored on the
C:\
partition. In order to save
desired data changes to the
C:\
partition the Protect Mode Save program must be
utilized.
It is good practice to shutdown and restart the ePro PS in preparation to making
permanent changes to the
C:\
partition. This step will ensure that all data stored in
volatile memory is cleared so that no unexpected corruption or changes will take place
on your
C:\
partition. Once the ePro PS has been restarted, make your changes and
then save the changes by selecting
Start>Programs>Protect Mode Save
.
Once the Protect Mode Save program has been launched, the changes that affect the
C:\
partition will be saved and then the ePro PS unit will automatically shutdown and
restart in Protect Mode.
Refer to the
section for additional information about Protect Mode.
