Eaton Current-Limiting Reactor, Руководство по установке

Страница: 17 / 32

Eaton Current-Limiting Reactor (2500A) Installation Manual P-164001115—Rev 02 9
Figure 3. Reactor Anchor Locations
Hole at each corner
for securing unit to
the loor.
Current-Limiting Reactor
Bottom View
33..55 IInnssttaalllliinngg tthhee O Oppttiioonnaall S Siiddee C Caarr
The Current-Limiting Reactor will sometimes be installed over existing conduit in a concrete floor and the
position of the conduit may not match the unit’s cable entry panels. To accommodate the spacing of existing
conduit, an optional Side Car provides more cable entry space.
The Side Car has removable side panels allowing it to be attached to either side of an Current-Limiting Reactor.
1. On the sides to be joined together:
a. On the Current-Limiting Reactor, remove the top and bottom side panels.
b. On the Side Car, remove the top and bottom side panels.
NOTE Side Car side panels can be removed from either side to make a Left-Hand or Right-
Hand Side Car.
Figure 4. Side Car Configurations
Installation