With Visor and Guard
With Visor Only
With Guard Only
VISOR INSTALLATION INSTRUCTIONS
1.
Remove power from floodlight.
2.
Place floodlight face up.
3.
Carefully align visor with four (4) screw holes at the top of the fixture
shown in Figure 8.
4.
Install screws provided with visor, taking care to not scratch the finish of
the floodlight. Torque to 19 in.-lbs. (2.2 N-m).
5.
Install floodlight per above instructions.
NOTE:
Visor can be installed before or after floodlight has been in operation.
GUARD INSTALLATION INSTRUCTIONS
1.
Remove power from floodlight.
2.
Place floodlight face up.
3.
Carefully align guard with four (4) screw holes on each side of the fixture shown
in the image above.
4.
Install screws provided with guard, taking care to not scratch the finish of the
floodlight. Torque to 19 in.-lbs. (2.2 N-m).
5.
Install floodlight per above instructions.
NOTE:
Guard can be installed before or after floodlight has been in operation.
Figure 6
Figure 7
Figure 8
DIMENSIONS
Figure 5
IF 1753 • 04/22 Copyright
®
2022, Eaton’s Crouse-Hinds Division
Page 3
