5
4
EATON
IL504001EN
Installation instructions
EATON
IL504001EN
Installation instructions
Installation Instructions – CoviO Linear Cove System
Installation Instructions – CoviO Linear Cove System
To disconnect, squeeze the silver tab on the male connector pull apart fixtures.
Figure 7
Figure 8
Figure 9.1
Figure 9.2
9. Mountings are designed to span between fixtures to assure alingnment between fixtures within the cove. Connectors
have 2” standoffs to align with the cove wall and optimize cove lighting performance.
2”
10. Install fixture into mounting by making sure mounting channel in the bottom of the fixture engages with the mounting
clip.
Fixture can then be rotated into place making sure the top clip engages in the upper mounting channel to secure fixture in
any orientation.
Fixture should touch
Mounting Stop
A
A
Brackets should be placed at either 12” or
24” on center spacing , depending on fixture
length (Dimension A)
