Mounting sequence
100 A Tap-Changer Switch - Cap/Wrench, Lever or Hotstick Operable Handles Installation Instructions
4
mounting Sequence
Cap/Wrench
Nut
Tank Wall
Gasket
Switch
NOTES:
Switch can be used on 14 gauge to �25 inch thick frontplate�
Bolt tabs are bent up 90° and have a hole to accept �25 inch
(6 mm) hardware�
Figure 2.
Cap/Wrench Assembly.
Figure 3.
One-Phase Cap Wrench Switch.
* Dimension will decrease as tank wall thickness increases� Maximum dimension
given with 14 gauge tank wall�
Figure 4.
Cap Wrench - Front View.
Screw
Lockwasher
Flat Washer
Metal or
Thermoplastic
Lever Handle
Nut
Tank Wall
Index Plate
Gasket
Switch
Figure 5.
Lever Assembly.
Figure 6.
One-Phase Lever Handle Switch.
* Dimension will decrease as tank wall thickness increases� Maximum dimension
given with 14 gauge tank wall�
Figure 7.
Lever Handle - Front View.
* Dimension will decrease as tank wall thickness increases� Maximum dimension
given with 14 gauge tank wall�
Cap/Wrench
Nut
Tank Wall
Gasket
Switch
Figure 2 . Cap/wrench assembly
100 A Tap-Changer Switch - Cap/Wrench, Lever or Hotstick Operable Handles Installation Instructions
4
mounting Sequence
Cap/Wrench
Nut
Tank Wall
Gasket
Switch
NOTES:
Switch can be used on 14 gauge to �25 inch thick frontplate�
Bolt tabs are bent up 90° and have a hole to accept �25 inch
(6 mm) hardware�
Figure 2.
Cap/Wrench Assembly.
Figure 3.
One-Phase Cap Wrench Switch.
* Dimension will decrease as tank wall thickness increases� Maximum dimension
given with 14 gauge tank wall�
Figure 4.
Cap Wrench - Front View.
Screw
Lockwasher
Flat Washer
Metal or
Thermoplastic
Lever Handle
Nut
Tank Wall
Index Plate
Gasket
Switch
Figure 5.
Lever Assembly.
Figure 6.
One-Phase Lever Handle Switch.
* Dimension will decrease as tank wall thickness increases� Maximum dimension
given with 14 gauge tank wall�
Figure 7.
Lever Handle - Front View.
* Dimension will decrease as tank wall thickness increases� Maximum dimension
given with 14 gauge tank wall�
Figure 3 . One-phase cap wrench switch
* Dimension will decrease as tank wall thickness increases. Maximum dimension
given with 14 gauge tank wall.
Figure 4 . Cap wrench - front view
otee:
N
Switch can be used on 14 gauge to .25 inch thick
frontplate. Bolt tabs are bent up 90° and have a hole
to accept .25 inch (6 mm) hardware.
Screw
Lockwasher Flat
Washer
Metal or
Thermoplastic
Lever Handle
Nut
Tank Wall
Index Plate
Gasket
Switch
Figure 5 . Lever assembly
Figure 6 . One-phase lever handle switch
* Dimension will decrease as tank wall thickness increases. Maximum dimension
given with 14 gauge tank wall.
Figure 7 . Lever handle - front view
* Dimension will decrease as tank wall thickness increases. Maximum dimension
given with 14 gauge tank wall.
3
INSTALLATION INSTRUCTIONS
MN800014EN February 2017
100 A tap-changer switch cap/wrench, lever or hotstick operable handles installation instructions