Operating Instructions
9
dAt
: here you can change the time and date.
In5
: with this submenu you can execute the installation drive which
is necessary after the first installation therewith the RF Radiator
thermostat will be adapted to the radiator valve.
toF
: here you can set an offset temperature.
rE5
: With this submenu you can load the factory settings in the RF
Radiator Thermostat.
2.7
Initial start-up in the stand alone operation
1)
Enter the submenus with a long press of the "Menu button"
2)
Set via the submenu
dAt
the time and date
(see also chapter 2.9)
3)
Execute the installation drive via the submenu
In5
therewith
the RF Radiator Thermostat is adapted to the radiator
valve. The drive will be moved in the inital position. As soon
as
tA
will be displayed you can start the installation drive
by pressing the „OK button“.
4)
Set in the submenu
Pro
the day and night temperature and
the week program
5)
Set in the submenu
toF
the offset temperature
(see also chapter 2.14)
6)
Close the submenus with a short press of the
"Menu button"
2.8
Initial start-up in the actuator operation
1)
Enter the submenus with a long press of the "Menu button"
2)
Execute the installation drive via the submenu
In5
therewith
the RF Radiator Thermostat is adapted to the radiator
valve. The drive will be moved in the inital position.
