Eaton GmbH
10
As soon as
tA
will be displayed you can start the
installation drive by pressing the „OK button“.
3)
Close the submenus with a short press of the
"Menu button"
4)
All Further settings will be done by the electrical engineer
via the configuration software.
2.9
Time and date
Enter with a long press of the "menu button" the submenus of the
RF Radiator Thermostat.
In the submenus you have to select
dAt
with the wheel and to
enter it by pressing the "OK button"
In the submenu you can set the actual year, month, day and time.
Via the wheel you can change the values and with the "OK button"
you can acknowledge it therewith you can jump to the next value.
Note:
In the case that the connection between the RF Radiator
Thermostat and the central device dails an Emergency Mode
will be automatically started. In the Emergency Mode the last
known set temperature is used to control the room tempera-
ture. The set temperature can also be changed with the
wheel. As soon as the connection is established again the
room temperature will be automatically controlled again
accordingly the week program and the temperature levels of
the central device.
