Eaton AQB-L400, Инструкция по применению

Страница: 2 / 2

Page4
Eaton
Moon Township, Pennsylvania U.S.A.
Style No. 69C0670H02 Effective October 1997 Printed in U.S.A./CCI
I.L. 15578A
I.L. 15578A
File 29-000
Instructions for Use of Eaton Adapter Kit and Navy Type AQB­L400 Molded
Case Circuit Breaker Combination in AQB-LF400 Applications
A
WARNING
DO NOT ATTEMPT TO INSTALL OR PERFORM MAIN­
TENANCE ON EQUIPMENT WHILE IT IS ENERGIZED.
DEATH, SEVERE PERSONAL INJURY, OR SUBSTAN­
TIAL PROPERTY DAMAGE CAN RESULT FROM CON­
TACT WITH ENERGIZED EQUIPMENT. ALWAYS
VERIFY THAT NO VOLTAGE IS PRESENT BEFORE
PROCEEDING WITH THE TASK, AND ALWAYS FOL­
LOW GENERALLY ACCEPTED SAFETY PROCE­
DURES.
EATON IS NOT LIABLE FOR THE MISAP­PLICATION
OR MISINSTALLATION OF ITS PROD­UCTS.
The user is cautioned to observe all recommendations,
warnings, and cautions relating to the safety of personnel
and equipment, as well as all general and local health
and safety laws, codes, and procedures.
The recommendations and information contained herein
are based on Eaton experience and judgement, but
should not be considered to be all inclusive or cover­ing
every application or circumstance which may arise. If any
questions arise, contact Eaton for further information or
instructions.
Fig. 1-1 Standard Navy Type AQB-L400 Molded Case
Circuit Breaker
Effective October 1997 Supersedes I .L. 1557B dated June 1992
PART 1. INTRODUCTION
General Information
The Navy Type AQB-L400 or AQB-LL400 circuit
breakers (Figure 1-1), when supplied with a factory
installed Eaton AQB-L400 Adapter Kit (Figures 1-2 and
1-3), can be installed directly into Navy Type AQB-LF400
applications. This combination of an AQB-L400/LL400
circuit breaker and the Eaton Adapter Kit pro­vides a
direct one to one current limiting type L400 circuit
breaker replacement for an already installed fused type
LF400 circuit breaker. Existing AQB-L400/LL400 circuit
breakers in the field (manufactured prior to August, 1992)
may need a factory modification to accept the Adapter
Kit. Contact Eaton for details, if there are any questions.
Fig. 1-2. Navy Type AQB-L400 Molded Case Circuit
Breaker with Adapter Kit Factory Installed
Fig. 1-3. Eaton Adapter Kit Parts Before
Installation