Eaton 9PX6KIRTN-L Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 50

Eaton 9PX6KIRTN-L Скачать руководство пользователя страница 2

©Copyright 2022 Eaton, Raleigh, NC, USA. All rights reserved. No part of this document may be reproduced in any way without the
express written approval of Eaton.

S

Saaffeettyy IInnssttrruuccttiioonnss

SAVE THESE INSTRUCTIONS.

This manual contains important instructions

that should be followed during installation and

maintenance of the UPS and batteries.

The 9PX models that are covered in this manual are intended for installation in an environment within
0 to 40°C, free of conductive contaminant.

WARNING: This is a category C2 UPS product. In a residential environment, this product may cause
radio interference, in which case the user may be required to take additional measures. NOTE Such
additional measures can require the services of a person or organization skilled with respect to EMC
aspects.

S

Sppeecciiaall S

Syym

mbboollss

The following are examples of symbols used on the product to alert you to important information:

RISK OF ELECTRIC SHOCK

- Observe the warning associated with the risk of electric shock

symbol.

CAUTION: REFER TO OPERATOR'S MANUAL

- Refer to your operator's manual for

additional information, such as important operating and maintenance instructions.

This symbol indicates that you should not discard the UPS or the UPS batteries in the trash.
This product contains sealed, Lithium-Ion batteries and must be disposed of properly. For
more information, contact your local recycling/reuse or hazardous waste center.

This symbol indicates that you should not discard waste electrical or electronic equipment
(WEEE) in the trash. For proper disposal, contact your local recycling/reuse or hazardous
waste center.

«
1
2
3
4
...
»

Содержание 9PX6KIRTN-L



















































Отзывы:

Нет отзывов