![background image](http://html1.mh-extra.com/html/eaton/150-vcp-tl16/150-vcp-tl16_instructions-for-the-use-operation-and-maintenance_524726020.webp)
Instruction Book
Page 14
Effective: May 2016
For more information visit:
www.Eaton.com
IB131017EN
Figure 3-2 Keyed Shipping Clamp Being Removed From
Typical Pallet Mounted Fixed Breaker
WARNING
THE CUSTOMER SHOULD READ AND UNDER-
STAND THE MATERIAL PRESENTED AND ANY
WARNINGS OR CAUTIONS OFFERED IN THE
INSTRUCTION BOOK BEFORE ANY ATTEMPT IS
MADE TO INTERFACE WITH THIS CIRCUIT BREAK-
ER.
IT IS IMPERATIVE THAT ALL APPLICABLE ANSI
STANDARDS BE COMPLIED WITH IN EVERY
RESPECT AND THAT NO COMPROMISES ARE MADE
WITH RESPECT TO THE ANSI GUIDELINES OR
INTENT.
UNDER NO CIRCUMSTANCES SHOULD
ALTERATIONS BE MADE TO EATON SUPPLIED VCP-
T VCP-TR CIRCUIT BREAKERS UNLESS THE
ALTERATION IS SPECIFICALLY ADDRESSED IN AND
PERMITTED BY THIS INSTRUCTION BOOK.
3-3 STORAGE
If the circuit breaker is to be placed in storage, maxi-mum
protection can be obtained by keeping it packed as
shipped. Before placing it in storage, checks should be
made to make sure that the breaker is free from ship-ping
damage and is in satisfactory operating condition.
Outdoor storage is NOT recommended. If unavoidable,
the outdoor location must be well drained and a tempo-
rary shelter from sun, rain, snow, corrosive fumes, dust,
dirt, falling objects, excessive moisture, etc. must be
provided. Containers should be arranged to permit free
circulation of air on all sides and temporary heaters
should be used to minimize condensation. Moisture can
cause rusting of metal parts and deterioration of high
voltage insulation. A heat level of approximately 400
watts for each 100 cubic feet of volume is recommended
with the heaters distributed uniformly throughout the
structure near the floor.
Indoor storage should be in a building with sufficient
heat and circulation to prevent condensation. If the
building is not heated, the same general rule for heat as
for outdoor storage should be applied.
3-4 TYPICAL BREAKER AND CASSETTE WEIGHTS
Table 3.1 Circuit Breaker and Cassette Weights
Circuit
Breaker
Type
Current
Rating
(Amps)
Approximate Weight
(lb)
Fixed
Drawout
Cassette
50 VCP-TRL16
and
50 VCP-TL16
600
153
232
157
800
153
232
157
1200
155
234
157
1600
157
NA
NA
50 VCP-TRL20
and
50
VCP-TL20
600
159
237
157
800
159
237
157
1200
161
239
157
1600
163
NA
NA
50 VCP-TRL25
and
50
VCP-TL25
600
166
243
157
800
166
243
157
1200
168
245
157
1600
170
NA
NA
75 VCP-TRL16
and
75 VCP-TL16
600
155
232
161
800
155
232
161
1200
157
234
161
1600
159
NA
NA
75 VCP-TRL20
and
75 VCP-TL20
600
161
239
161
800
161
239
161
1200
163
241
161
1600
165
NA
NA
75 VCP-TRL25
and
75 VCP-TL25
600
166
245
161
800
166
245
161
1200
168
247
161
1600
170
NA
NA
150 VCP-TRL16
and
150 VCP-TL16
600
155
234
161
800
155
234
161
1200
157
237
161
1600
159
NA
NA
150 VCP-TRL20
and
150 VCP-TL20
600
161
239
161
800
161
239
161
1200
163
241
161
1 600
166
NA
NA
150 VCP-TRL25
and
150 VCP-TL25
600
168
245
161
800
168
245
161
1200
170
247
161
1600
172
NA
NA
Содержание 150 VCP-TL16
